Remington Rolling Block No.5
The #5 Remington rolling block rifles are also known as the smokeless powder cartridge rolling block rifles. Beginning production in 1896 they comprise the 1897, 1902, and 1910 models. While the #5 was produced in several smokeless center fire cartridges the vast majority of them are chambered 7mm Mauser. We have depicted the 1897 and 1902 models below as the 1902 and 1910 internals are identical.
|
No.5 1897 |
No.5 1902/1910 |
|
|
|
|
Part # |
Description |
Price |
| Front Barrel Band Screw (not pictured) Hollow Hex Head |
$6.00 |
|
Forend tip mounting screw. this is the thin screw with tiny head that mounts through the front of the forend holding the metal tip onto the stock. |
$6.00 |
|
| Rear Barrel Band Screw (not pictured) |
$6.00 |
|
|
5ER |
Extractor, Rotary 1902/1910 (Rimmed
Cartridges only) |
$35.00 |
|
1F |
Extractor Retaining Screw (1897) |
$6.00 |
|
5E |
Extractor, Straight Bar |
$35.00 |
|
5ES |
Extractor Limiting Screw |
$6.00 |
|
1S |
Guard Screw (Military) |
$6.00 |
|
5A |
Firing Pin |
$15.00 |
|
1Y |
Firing Pin Retractor |
$12.00 |
|
1K |
Locking Lever |
$20.00 |
|
1R |
Main Spring Screw |
$6.00
|
|
1Q |
Main
Spring |
$22.00 |
|
1T |
Pin Retainer Plate |
$20.00 |
|
1D |
Pin Retainer Plate Screw |
$6.00 |
|
|
Saddle Ring Carbine Staple (Not
Pictured) |
$35.00 |
|
|
Saddle Ring Carbine Staple Mounting
Screw (Not Pictured) |
$10.00 |
|
Military Rear Sight Mounting Screw Set (two screws, not pictured) |
$10/set or $6 single |
|
|
5U |
Tang Screw |
$10.00 |
|
Trigger return spring, military. (for aftermarket trigger return spring kit that reduces trigger pull, see accessory page) |
$10 |
|
|
1M |
Trigger |
$35.00 |
|
1M |
Cleaning Rod, Hand fordged as original reproduction 7mm. |
$35.00 + 5.35 Shipping
|
|
*NOTE - Parts not listed above may be listed on the Original Parts Page subject to availability |
|
**NOTE - These parts are furnished in the white and have not been heat treated (use Kasenit - Brownells) |
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $2.00 for the first part and an additional .50 for each additional part. Payment may be made by check or money order payable to G. S. Womack, 5100 Garden Valley Rd, Garden Valley, CA 95633.
Email questions or comments to kgwebay@wildblue.net or info@rollingblockparts.com
530-333-2233
Copyright � 2008 G. S. Womack! All rights reserved.