|
No.1 Straight Bar Extractor |
No.1 Rotary Extractor |
|
No.1 Sporting |
No.1 1/2 Sporting |
The #1 Remington rolling block rifle is also known as the black powder cartridge rifle. Produced by Remington in both military and civilian models from 1866 to 1895 these large frame rolling block production totaled well over 1 million rifles with a number of variations. Illustrated here are examples of the common variations encountered. The early #1 with it's bar extractor, the late #1 or rotary extractor receiver, as well as the large frame black powder cartridge sporting rifles. The parts layouts below will assist in the identification of both model and part identification.
|
No.1 Straight Bar Extractor |
No.1 Rotary Extractor |
|
No.1 Sporting |
No.1 1/2 Sporting |
|
|
|
|
Part # |
Description |
Price |
Butt Plate Casting #1 Sporting Model. this part requires finishing and drilling the pre spotted holes. |
$70 |
|
|
1X |
Extractor, Rotary (Late No.1) extractor cut for .43 Spanish cartridge |
$35.00 |
|
1F |
Extractor Retaining Screw |
$6.00 |
|
1Y |
Firing Pin Retractor (Late No.1) |
$12.00 |
|
1Z |
Firing Pin Retractor Mounting Pin |
$3.00 |
|
1B |
Firing Pin Retaining Screw |
$6.00 |
Forend Casting. #1 early Sporting model forend tip. this part needs to be finished. |
$30.00 |
|
|
1S |
Guard Screw (Military) |
$10 pair, $6 ea |
|
|
Guard Screw, rear (No.1 Sporting) (Not Pictured) |
$10 pair/ $6 each |
|
1K |
Locking Lever** |
$20.00 |
|
1J |
Locking Lever Mounting Pin |
$3.00 |
|
1Q |
Main Spring |
$22.00 |
|
1R |
Main Spring Screw $3 when ordered w/ the spring |
$5.00 |
|
1T |
Pin Retainer Plate ("button") |
$20.00 |
|
1D |
Pin Retainer Plate Screw ($3 when ordered with button) |
$6.00 |
|
Rear Barrel Sight Mounting Screw (original sporting model) not pictured |
$10/pair, $6 each |
|
|
|
Rear Sight Mounting Screw (No.1 Carbine) - $3 when ordered with the Sight |
$6.00 |
|
|
Saddle Ring Carbine Staple (Not Pictured) |
$35.00 |
|
|
Saddle Ring Carbine Staple Mounting Screw (Not Pictured) |
$10.00 |
|
1U |
Tang Screw |
$10.00 |
|
Trigger return spring kit- aftermarket return spring to reduce trigger pull, the best. |
$15.00 |
|
|
1M |
Trigger** |
$35.00 |
|
Cleaning rod for the Modelo Argentino 1879 military rifle (same rod as most 11mm military rifles) |
$35.00 - $4.95 S&Ins. |
|
Barrel band screw for 1879 Argentine model ($10 a set when ordered w/ the nut below) |
$6 |
|
| Barrel band nut for the 1879 Argentine, this is the round nut unique to this model ($10 a set when ordered w/ the screw above) | $6 each, $12 for set of 3 | |
| Barrel Band Screw for late #1 military rifle barrel bands | $10 pair, $6 each | |
| Hex head hollow barrel band screw for the swivel mounted middle band of the late #1 military rifle | $6.00 | |
|
1L |
Trigger Mounting Pin |
$3.00 |
|
*NOTE - Parts not listed above may be listed on the Original Parts Page subject to availability |
|
**NOTE - These parts are furnished in the white and have not been heat treated (use Kasenit - Brownells) |
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $2.00 for the first part and an additional .50 for each additional part except where noted otherwise. Payment may be made by check or money order payable to G. S. Womack, 5100 Garden Valley Rd. Garden Valley, CA 95633.
Email questions or comments to kgwebay@wildblue.net or info@rollingblockparts.com
530-333-2233 (PST)
Copyright © 2008 G. S. Womack! All rights reserved.
